California Marine LogoCalifornia Marine Logo
Catalina Performance Parts Logo
Browse Parts By Category
Air Cleaners
Air Scoops
Alternators
American Turbine-AT 309 Jet Drive
American Turbine-SD 309 Jet Drive
American Turbine-SD 312 Jet Drive
Bearing Housing
Bearing Sleave
Bearing Sleave Nut
Bearings: Bowl
Bearings: Bushings
Bearings: Thrust
Bowl Plug
Controls & Cables
Cotter Pin
Drivelines
Dry Run Kits
Engine Mount Insulator
Epoxy Kits
Fasteners (Stainless Steel)
Fastening Kits
Flush Kits
Flywheel Adapters
Gaskets, H.D.
Grease Fittings Stainless Steel
Grease Jet
Impeller Key
Impeller Nut
Impellers:High Performance Stainless Steel 17 - 4 P H, Balanced
Installation Kit
Insulator
Jet Trim
Nozzle Housing
O - Rings
Overhaul Kit (Not Exactly as Illustrated)
Power Take-offs
Reverse Cable Packer
Reverse Pivot Pin Kit
Rubber Insulator
Rudders
Sand Trap
Sea Strainer
Seal Face Housing
Seals
Shafts
Shim Kits
Snap Rings
Speed Coat
Steering Tube & Parts
Steering: Berkeley Style, Plus Parts
Steering: SDR Split Duct Reverse, Plus Parts
Wear Rings: Billet Bronze
Wedges
Ball Cocks
Battery Boxes
Battery Switch
Bearings
Bell Housings
Berkeley Jet Drive
Bilge Pumps
Block-off Plates
Borg Warner Transmissions
Bosses
Bosses, Cavatation Plates
Cables and Accessories
Cams
Carburetors and Accessories
Cavitation Plates Accessories
Clamps
Cleats
Closed Cooling
Collars, Safety
Controls
Couplers, Split Sleeve
Deck Mounts
Distributors
Dividers
Dominator Jet Drive
Drains
Drive Lines
Dry Run Kits
Engine Mounts
Engines
Engines Marine
Epoxy Putty
Exhaust Elbos
Exhaust Ports
Exhaust Ports with Mufflers
Exhaust Systems
Fasteners
Fins
Flame Arrestors
Flex Plates
Flush Kits
Flywheel Power Take-Offs (Specify Std or P.G.)
Flywheels
Fuel Fills
Fuel Filters
Fuel Lines
Fuel Pumps
Gaskets
Gauge Bezels
Gauge Mount
Gauge Senders
Gauges
Grab Handles
Grease, Jet
Harmonic Balancers
Heat Exchangers
Hose
Hose Fittings
Instruments
Intake Manifolds
Jet Garden Hose Connection Kits
Kodiak Jet Drive
Motor Mounts
Mufflers
Oil Adapters & Hose Kits
Oil Coolers
Oil Drain Kits
Oil Filters
Oil Pans
Oil Primers
Packing
Paint
Pick-Ups
Place Diverter Jet Trim
Plugs
Plugs
Polish
Propeller
Pulleys
Pumps
Rudder Support Bracket
Rudder/Stuffing Boxes
Rudders
Run Dry Kits
Sand Trap
Sea Strainer
Seals
Senders
Sensors
Shaft Log
Shaft Log Stuffing Boxes
Shafts
Ski - Tows
Spark Plugs
Speed Grates
Speedcoat
Starters
Steering Accessories
Steering Systems
Steering Wheels
Stringer Washers
Struts
Switch Bezels
Switches
Tach. Mount
Tachometer
Thermostat Kits
Throttles
Thru-Hull Fittings
Tiller Arms
Tilt Shims
Timing Gear Covers
Timing Pointers
Trim Tabs
Turnbuckles
V - Drives
Valve Covers
Valve Covers Accessories
Velvet Drive Borg Warner Transmissions
Vents, Fuel
Water Cover Plates
Water Filters
Water Pumps
Wedges
Wire Extension
Wire Harness, Engine

Welcome to our American Turbine-SD 312 Jet Drive page!

American Turbine-SD 312 Jet Drive: Bearing Housing

Image Part Number Details (click to view single part)
Bearing Housing Fastening Kit (6) 5/16 inch x 4 1/2 inch. F051836HHK Bearing Housing Fastening Kit (6) 5/16 inch x 4 1/2 inch.
Bearing Housing, SD203, 309, 312. SC2101 Bearing Housing, SD203, 309, 312.
Bearing Cap Engine Mount Insulator. SC4007 Bearing Cap Engine Mount Insulator.
Bearing Cap Engine Mount Insulator.<br><br> (QTY:10) SC4007-10 Bearing Cap Engine Mount Insulator.

(QTY:10)

American Turbine-SD 312 Jet Drive: Bearing Sleave

Image Part Number Details (click to view single part)
Anodized Aluminium, Threaded. SH5001 Anodized Aluminium, Threaded.

American Turbine-SD 312 Jet Drive: Bearing Sleave Nut

Image Part Number Details (click to view single part)
Self Locking. SH5101 Self Locking.

American Turbine-SD 312 Jet Drive: Bearings: Bowl

Image Part Number Details (click to view single part)
Bowl, Grease Lube. B1502 Bowl, Grease Lube.
Bowl, Grease Lube.<br><br> (QTY:10) B1502-10 Bowl, Grease Lube.

(QTY:10)

American Turbine-SD 312 Jet Drive: Bearings: Bushings

Image Part Number Details (click to view single part)
Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle. B2007 Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.
Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.<br><br> (QTY:10) B2007-10 Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.

(QTY:10)
3/8 inch x 1/2 inch, Reverse Bucket Pin. B2105 3/8 inch x 1/2 inch, Reverse Bucket Pin.
5/8 inch x 7/16 inch Long, Turbine Trim, Solid Gray Plastic. B2301 5/8 inch x 7/16 inch Long, Turbine Trim, Solid Gray Plastic.
1/2 inch x 1/2 inch SDR Bucket. B2501 1/2 inch x 1/2 inch SDR Bucket.

American Turbine-SD 312 Jet Drive: Bearings: Thrust

Image Part Number Details (click to view single part)
High Performance QJ Style. B1101 High Performance QJ Style.
Bearing Assembly including B1101, SH5001 Bearing Sleeve & SH5101 Nut. (See SLK4008 for Seal, O-Ring Kit.) BA1201 Bearing Assembly including B1101, SH5001 Bearing Sleeve & SH5101 Nut. (See SLK4008 for Seal, O-Ring Kit.)

American Turbine-SD 312 Jet Drive: Bowl Plug

Image Part Number Details (click to view single part)
O-Ring. 02203 O-Ring.
Billet Anodized Aluminum with Stainless Steel Grease Fitting & O-Ring. SCA9001 Billet Anodized Aluminum with Stainless Steel Grease Fitting & O-Ring.

American Turbine-SD 312 Jet Drive: Controls & Cables

Image Part Number Details (click to view single part)
See Catalina Performance Parts Online at www.catalinaperformanceparts.com Call +1-604-278-1880 See Catalina Performance Parts Online at www.catalinaperformanceparts.com

American Turbine-SD 312 Jet Drive: Cotter Pin

Image Part Number Details (click to view single part)
Stainless Steel. F0316CP Stainless Steel.
Stainless Steel.<br><br> (QTY:10) F0316CP-10 Stainless Steel.

(QTY:10)

American Turbine-SD 312 Jet Drive: Drivelines

Image Part Number Details (click to view single part)
Jet Drive Line, 1310 Berkeley, Dominator, ATJ., Hamilton, Jacuzzi, 7 1/16 inch O.A.L., 1 3/8 inch - 10 Spline. 4 Bolt Flange. Fits Kodiak, Marine Power, Redline and Other Engines. Replaces 770 H-Bar and #312731-001. 122060 Jet Drive Line, 1310 Berkeley, Dominator, ATJ., Hamilton, Jacuzzi, 7 1/16 inch O.A.L., 1 3/8 inch - 10 Spline. 4 Bolt Flange. Fits Kodiak, Marine Power, Redline and Other Engines. Replaces 770 H-Bar and #312731-001.

American Turbine-SD 312 Jet Drive: Dry Run Kits

Image Part Number Details (click to view single part)
3/4 inch SD309 & SD312, American Turbine. 132090B 3/4 inch SD309 & SD312, American Turbine.
Spare Brass Cap complete with Washer. 132100 Spare Brass Cap complete with Washer.

American Turbine-SD 312 Jet Drive: Engine Mount Insulator

Image Part Number Details (click to view single part)
Bearing Cap Engine Mount Insulator. SC4007 Bearing Cap Engine Mount Insulator.
Bearing Cap Engine Mount Insulator.<br><br> (QTY:10) SC4007-10 Bearing Cap Engine Mount Insulator.

(QTY:10)

American Turbine-SD 312 Jet Drive: Epoxy Kits

Image Part Number Details (click to view single part)
Two Part Heavy Duty Kit, 24 oz., 680 Grams. 122100 Two Part Heavy Duty Kit, 24 oz., 680 Grams.

American Turbine-SD 312 Jet Drive: Fasteners (Stainless Steel)

Image Part Number Details (click to view single part)
Intake to Suction Capscrew 5/16 inch x 1  inch. (2 Required Rear). F051808HH Intake to Suction Capscrew 5/16 inch x 1 inch. (2 Required Rear).
Intake to Suction Capscrew 5/16 inch x 1 1/4 inch (8 Required). F051810HH Intake to Suction Capscrew 5/16 inch x 1 1/4 inch (8 Required).
Bearing Housing Fastening Kit (6) 5/16 inch x 4 1/2 inch. F051836HHK Bearing Housing Fastening Kit (6) 5/16 inch x 4 1/2 inch.
Lockwasher, 5/16 inch. F05LW Lockwasher, 5/16 inch.
Thick Wash. Hand Hole Cover. F06TW Thick Wash. Hand Hole Cover.
Wing Nut 3/8 inch, Hand Hole Cover. F06WN Wing Nut 3/8 inch, Hand Hole Cover.

American Turbine-SD 312 Jet Drive: Fastening Kits

Image Part Number Details (click to view single part)
Transom Flange, SD-309, SD-312 Kit. FK3301 Transom Flange, SD-309, SD-312 Kit.

American Turbine-SD 312 Jet Drive: Flush Kits

Image Part Number Details (click to view single part)
3/4 inch SD309 & SD312, American Turbine. 132090B 3/4 inch SD309 & SD312, American Turbine.
Spare Brass Cap complete with Washer. 132100 Spare Brass Cap complete with Washer.

American Turbine-SD 312 Jet Drive: Flywheel Adapters

Image Part Number Details (click to view single part)
See Catalina Performance Parts Online at www.catalinaperformanceparts.com Call +1-604-278-1880 See Catalina Performance Parts Online at www.catalinaperformanceparts.com

American Turbine-SD 312 Jet Drive: Gaskets, H.D.

Image Part Number Details (click to view single part)
Nozzle Housing Gasket. G2507 Nozzle Housing Gasket.
Steering Mount Transom. G4001 Steering Mount Transom.

American Turbine-SD 312 Jet Drive: Grease Fittings Stainless Steel

Image Part Number Details (click to view single part)
Stainless Steel 1/8 inch N.P.T. Grease Fitting. 126320 Stainless Steel 1/8 inch N.P.T. Grease Fitting.
Stainless Steel 1/8 inch N.P.T. Grease Fitting.<br><br> (QTY:10) 126320-10 Stainless Steel 1/8 inch N.P.T. Grease Fitting.

(QTY:10)

American Turbine-SD 312 Jet Drive: Grease Jet

Image Part Number Details (click to view single part)
High Performance Jet, Superior Friction Reduction. 126300 High Performance Jet, Superior Friction Reduction.
High Performance Jet, Superior Friction Reduction.<br><br> (QTY:10) 126300-10 High Performance Jet, Superior Friction Reduction.

(QTY:10)

American Turbine-SD 312 Jet Drive: Impeller Key

Image Part Number Details (click to view single part)
Stainless Steel. SH3007 Stainless Steel.
Stainless Steel.<br><br> (QTY:10) SH3007-10 Stainless Steel.

(QTY:10)

American Turbine-SD 312 Jet Drive: Impeller Nut

Image Part Number Details (click to view single part)
Aluminum. SH3507 Aluminum.
Self Locking. SH3507SL Self Locking.
Self Locking.<br><br> (QTY:10) SH3507SL-10 Self Locking.

(QTY:10)

American Turbine-SD 312 Jet Drive: Impellers:High Performance Stainless Steel 17 - 4 P H, Balanced

Image Part Number Details (click to view single part)
5.7 A. IMA24S 5.7 A.
5.7 S. IMA26S 5.7 S.
8.1 A. IMA30S 8.1 A.
8.1 S. IMA32S 8.1 S.

American Turbine-SD 312 Jet Drive: Installation Kit

Image Part Number Details (click to view single part)
Steering & Reverse Cable thru Hull Mounting Kit for SD & Set Back Pumps. TK5001 Steering & Reverse Cable thru Hull Mounting Kit for SD & Set Back Pumps.

American Turbine-SD 312 Jet Drive: Insulator

Image Part Number Details (click to view single part)
Wear Ring. WR6005 Wear Ring.
Wear Ring.<br><br> (QTY:10) WR6005-10 Wear Ring.

(QTY:10)

American Turbine-SD 312 Jet Drive: Jet Trim

Image Part Number Details (click to view single part)
Please email sales@californiamarine.com or Call +1-604-278-1880. More Info Required Please email sales@californiamarine.com or Call +1-604-278-1880.

American Turbine-SD 312 Jet Drive: Nozzle Housing

Image Part Number Details (click to view single part)
Nozzle Housing Only. Stock Berkeley Style. R1007 Nozzle Housing Only. Stock Berkeley Style.
Berkeley Style Droop Snoot (after mid 2004). R6007 Berkeley Style Droop Snoot (after mid 2004).

American Turbine-SD 312 Jet Drive: O - Rings

Image Part Number Details (click to view single part)
Hand Hole Cover. O1002 Hand Hole Cover.
Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon. O1505 Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon.
Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon.<br><br> (QTY:10) O1505-10 Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon.

(QTY:10)
Bowl Plug. O2203 Bowl Plug.
Bearing Housing. (2 required) O3301 Bearing Housing. (2 required)
Seal Face Housing. O3401 Seal Face Housing.
Seal Face Housing.<br><br> (QTY:10) O3401-10 Seal Face Housing.

(QTY:10)
Water Tube. O3801 Water Tube.
Water Tube.<br><br> (QTY:10) O3801-10 Water Tube.

(QTY:10)
Intake. O3901 Intake.
Suction Piece, Bowl. O4001 Suction Piece, Bowl.
Suction Piece, Bowl.<br><br> (QTY:10) O4001-10 Suction Piece, Bowl.

(QTY:10)
Bearing Cap Engine Mount Insulator. SC4007 Bearing Cap Engine Mount Insulator.
Bearing Cap Engine Mount Insulator.<br><br> (QTY:10) SC4007-10 Bearing Cap Engine Mount Insulator.

(QTY:10)

American Turbine-SD 312 Jet Drive: Overhaul Kit (Not Exactly as Illustrated)

Image Part Number Details (click to view single part)
SD 312 complete with Billet Bronze Wear Ring<br><br> (Note: Not Exactly as Illustrated). OHK1401 SD 312 complete with Billet Bronze Wear Ring

(Note: Not Exactly as Illustrated).

American Turbine-SD 312 Jet Drive: Power Take-offs

Image Part Number Details (click to view single part)
See Catalina Performance Parts Online at www.catalinaperformanceparts.com Call +1-604-278-1880 See Catalina Performance Parts Online at www.catalinaperformanceparts.com

American Turbine-SD 312 Jet Drive: Reverse Cable Packer

Image Part Number Details (click to view single part)
Aluminum 1/2 inch N.P.T. 43 Series. T2007 Aluminum 1/2 inch N.P.T. 43 Series.
Nylon 3/4 inch N.P.T. 43 Series. T2101 Nylon 3/4 inch N.P.T. 43 Series.
Nylon 1/2 inch N.P.T. 33 Series. T2201 Nylon 1/2 inch N.P.T. 33 Series.

American Turbine-SD 312 Jet Drive: Reverse Pivot Pin Kit

Image Part Number Details (click to view single part)
Reverse Pivot Pin Kit Stainless Steel Pin, Bushing, and Cotter Pin. R5005K Reverse Pivot Pin Kit Stainless Steel Pin, Bushing, and Cotter Pin.

American Turbine-SD 312 Jet Drive: Rubber Insulator

Image Part Number Details (click to view single part)
Bearing Cap Engine Mount Insulator. SC4007 Bearing Cap Engine Mount Insulator.
Bearing Cap Engine Mount Insulator.<br><br> (QTY:10) SC4007-10 Bearing Cap Engine Mount Insulator.

(QTY:10)

American Turbine-SD 312 Jet Drive: Rudders

Image Part Number Details (click to view single part)
3-Bolt Berk Style. & HTR Nozzle (Fits Both). RK2601B 3-Bolt Berk Style. & HTR Nozzle (Fits Both).
Stainless Steel Fastening Kit. RK2601FK Stainless Steel Fastening Kit.

American Turbine-SD 312 Jet Drive: Sand Trap

Image Part Number Details (click to view single part)
Sand Trap, Self Flushing, complete with (2) 3/4 inch Fittings & Ball Cock, Lexan Bowl. <br><br>An absolute must for Jet Boats. 148100 Sand Trap, Self Flushing, complete with (2) 3/4 inch Fittings & Ball Cock, Lexan Bowl.

An absolute must for Jet Boats.
Installation Kit complete with 8 feet Hose, Stainless Steel Thru-Hull, Hose Fitting & 4 Stainless Steel Clamps. 148100-8 Installation Kit complete with 8 feet Hose, Stainless Steel Thru-Hull, Hose Fitting & 4 Stainless Steel Clamps.
O-Ring (2 Required). 148101 O-Ring (2 Required).
Insulating Bushing (2 Required). 148103 Insulating Bushing (2 Required).
Lexan Bowl. 148105 Lexan Bowl.

American Turbine-SD 312 Jet Drive: Sea Strainer

Image Part Number Details (click to view single part)
Sand Trap, Self Flushing, complete with (2) 3/4 inch Fittings & Ball Cock, Lexan Bowl. <br><br>An absolute must for Jet Boats. 148100 Sand Trap, Self Flushing, complete with (2) 3/4 inch Fittings & Ball Cock, Lexan Bowl.

An absolute must for Jet Boats.
Installation Kit complete with 8 feet Hose, Stainless Steel Thru-Hull, Hose Fitting & 4 Stainless Steel Clamps. 148100-8 Installation Kit complete with 8 feet Hose, Stainless Steel Thru-Hull, Hose Fitting & 4 Stainless Steel Clamps.
O-Ring (2 Required). 148101 O-Ring (2 Required).
Insulating Bushing (2 Required). 148103 Insulating Bushing (2 Required).
Lexan Bowl. 148105 Lexan Bowl.

American Turbine-SD 312 Jet Drive: Seal Face Housing

Image Part Number Details (click to view single part)
Anodized Aluminum, Billet, SD309, SD312, SD203. SH5201A Anodized Aluminum, Billet, SD309, SD312, SD203.

American Turbine-SD 312 Jet Drive: Seals

Image Part Number Details (click to view single part)
Bearing housing. SL1101 Bearing housing.
Bearing housing.<br><br> (QTY:10) SL1101-10 Bearing housing.

(QTY:10)
Seal face housing. SL1201 Seal face housing.
Seal face housing.<br><br> (QTY:10) SL1201-10 Seal face housing.

(QTY:10)
Bowl after mid 1991, 2 Required. SL2003 Bowl after mid 1991, 2 Required.
Bowl after mid 1991, 2 Required.<br><br> (QTY:10) SL2003-10 Bowl after mid 1991, 2 Required.

(QTY:10)
Mechanical Seal Assembly. SL4008 Mechanical Seal Assembly.
SL4008,  SL1101, SL1201, 03301 (2),  03401, SH1507, F0316CP, Seal & O-Ring Kit. SLK4008 SL4008, SL1101, SL1201, 03301 (2), 03401, SH1507, F0316CP, Seal & O-Ring Kit.

American Turbine-SD 312 Jet Drive: Shafts

Image Part Number Details (click to view single part)
Shaft Only, 174-PH  High Performance. SH1207 Shaft Only, 174-PH High Performance.
Assembly complete with B1101 Bearing, SH5001 Bearing Sleeve, SH5101 Bearing Sleeve Nut, SH5201 Seal Face Housing, SL 1201 Seal, SL4008 mech. Seal Assembly, O-rings, Snap Ring and Stainless Steel Cotter Pin. SHA1207 Assembly complete with B1101 Bearing, SH5001 Bearing Sleeve, SH5101 Bearing Sleeve Nut, SH5201 Seal Face Housing, SL 1201 Seal, SL4008 mech. Seal Assembly, O-rings, Snap Ring and Stainless Steel Cotter Pin.

American Turbine-SD 312 Jet Drive: Shim Kits

Image Part Number Details (click to view single part)
Five Assorted Stainless Steel Shims. (used with Shouldered Wear Rings.) SHK4007 Five Assorted Stainless Steel Shims. (used with Shouldered Wear Rings.)
Five Assorted Stainless Steel Shims. (used with Shouldered Wear Rings.)<br><br> (QTY:10) SHK4007-10 Five Assorted Stainless Steel Shims. (used with Shouldered Wear Rings.)

(QTY:10)

American Turbine-SD 312 Jet Drive: Snap Rings

Image Part Number Details (click to view single part)
Bowl, Stainless Steel. SC9201 Bowl, Stainless Steel.
Shaft. SH1507 Shaft.
Shaft.<br><br> (QTY:10) SH1507-10 Shaft.

(QTY:10)

American Turbine-SD 312 Jet Drive: Speed Coat

Image Part Number Details (click to view single part)
Slip Plate Lubribond Air Dry Solid Film Lubricant 12oz. Aerosol. 140610 Slip Plate Lubribond Air Dry Solid Film Lubricant 12oz. Aerosol.

American Turbine-SD 312 Jet Drive: Steering Tube & Parts

Image Part Number Details (click to view single part)
Anodized Billet Tiller  Hook-Up Connection Kit to Steering. 141030 Anodized Billet Tiller Hook-Up Connection Kit to Steering.
Anodized Jet Steering Tube only, ATJ, Berkeley, Dominator, Jacuzzi. 141035 Anodized Jet Steering Tube only, ATJ, Berkeley, Dominator, Jacuzzi.
Anodized Seal Nut, Billet, complete with Stainless Steel Zert and O-Ring. <br><br>Seals End of Steering Tube to Minimize Water Penetration. 141041 Anodized Seal Nut, Billet, complete with Stainless Steel Zert and O-Ring.

Seals End of Steering Tube to Minimize Water Penetration.
Steering Extension, 4 inch, Billet. 141042-04 Steering Extension, 4 inch, Billet.
Steering Extension, 6 1/2 inch, Billet. 141042-06 Steering Extension, 6 1/2 inch, Billet.
Steering Extension, 10 inch, Billet. 141042-10 Steering Extension, 10 inch, Billet.
Steering Tube Ball. T2601 Steering Tube Ball.
Ball Flange, 4 - Bolt. T2701 Ball Flange, 4 - Bolt.

American Turbine-SD 312 Jet Drive: Steering: Berkeley Style, Plus Parts

Image Part Number Details (click to view single part)
Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle. B2007 Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.
Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.<br><br> (QTY:10) B2007-10 Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.

(QTY:10)
Nozzle Housing Gasket. G2507 Nozzle Housing Gasket.
Nozzle Housing Gasket.<br><br> (QTY:10) G2507-10 Nozzle Housing Gasket.

(QTY:10)
Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon. O1505 Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon.
Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon.<br><br> (QTY:10) O1505-10 Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon.

(QTY:10)
Nozzle Housing Only. Stock Berkeley Style. R1007 Nozzle Housing Only. Stock Berkeley Style.
Complete Assembly, Bolt on Replacement, 3.70 Bore. RA17071 Complete Assembly, Bolt on Replacement, 3.70 Bore.

American Turbine-SD 312 Jet Drive: Steering: SDR Split Duct Reverse, Plus Parts

Image Part Number Details (click to view single part)
Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle. B2007 Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.
Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.<br><br> (QTY:10) B2007-10 Bushing 3/4 inch x 3/4 inch with Standard Berkeley Style Nozzle.

(QTY:10)
1/2 inch x 1/2 inch SDR Bucket. B2501 1/2 inch x 1/2 inch SDR Bucket.
Reverse Bucket Bolt. BN2210 Reverse Bucket Bolt.
Reverse Bucket Stop Stainless Steel Socket Head Cap Screw, 1/4 inch x 1 inch. F042007SH Reverse Bucket Stop Stainless Steel Socket Head Cap Screw, 1/4 inch x 1 inch.
Nozzle Bolt, 5/8 inch x 1 3/4 inch. F101114HH Nozzle Bolt, 5/8 inch x 1 3/4 inch.
Star Lock Washer. F105W Star Lock Washer.
Nozzle Washer. F10TW Nozzle Washer.
Nozzle Housing Gasket. G2507 Nozzle Housing Gasket.
Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon. O1505 Nozzle, O-Ring, HTR II, Berkeley Style & SDR, Teflon.
Nozzle Housing Only. Stock Berkeley Style. R1007 Nozzle Housing Only. Stock Berkeley Style.
Nozzle. <BR><BR> See SRK2101 Image for Part Details. R2001 Nozzle.

See SRK2101 Image for Part Details.
Nozzle Bolt Bushing. RS2131 Nozzle Bolt Bushing.
Reverse Bucket. <BR><BR> See SRK2101D Image for Part Details. SR2101 Reverse Bucket.

See SRK2101D Image for Part Details.
Bucket Bracket (Left). SR4001L Bucket Bracket (Left).
Bucket Bracket (Right). SR4001R Bucket Bracket (Right).
Reverse Bucket Stop. SR5101 Reverse Bucket Stop.
Complete Bolt on Assembly, 22 inch O.A.W. 3.70 Bore <br><br> Click Image or Text to Enlarge. SRK2101I Complete Bolt on Assembly, 22 inch O.A.W. 3.70 Bore

Click Image or Text to Enlarge.

American Turbine-SD 312 Jet Drive: Wear Rings: Billet Bronze

Image Part Number Details (click to view single part)
Standard Size WR5100 Standard Size

American Turbine-SD 312 Jet Drive: Wedges

Image Part Number Details (click to view single part)
Jet Drive 4 degree may be used in pairs for 0 - 8 degree adjustment, ATJ, Dominator, or Berkeley 12JG. 149010 Jet Drive 4 degree may be used in pairs for 0 - 8 degree adjustment, ATJ, Dominator, or Berkeley 12JG.
Wedge Gasket. 149020 Wedge Gasket.
Stainless Steel Fastener Kit -  4 Degree. 149030 Stainless Steel Fastener Kit - 4 Degree.
Stainless Steel Fastener Kit for Dual Wedges. 149040 Stainless Steel Fastener Kit for Dual Wedges.


Copyright California Marine Sales Corporation, 1999-2018.
California Marine Sales Corporation, #150-6751 Graybar Road,
Richmond, B.C., Canada V6W 1H3
Phone (604) 278-1880, Fax (604) 278-6040
Email: sales@californiamarine.com